Views: 0 Author: Site Editor Publish Time: 2021-04-13 Origin: Site
1. Connect the water chiller first, adjust the position of the outlet pipe to adopt the principle of low inlet and high outlet to ensure that the cooling water is full of the cooling pipe and there can be no bubbles in the pipe, and then turn on the power.（Note: Pure water or distilled water should be added to the water chiller, and the temperature should be kept at 25℃-30℃.）
2. Pay attention to protect the output port of the laser tube to avoid the smoke generated during work and debugging from adhering to the surface of the output port, otherwise the power of the laser tube will decrease. The output port of the laser tube can be cleaned with absolute alcohol.
3. Keep the high-voltage electrode of the laser tube clean and dry, away from the metal body to avoid high-voltage sparking and discharge.
4. The working current of the laser tube should be less than 30mA, and Kernellaser's laser machines are equipped with digital ammeters.
5. The CO2 laser tube is made of glass and is fragile. When installing and using, avoid local stress.
